Gathering the Materials
Before embarking on the task of restringing your Lawn Master weed eater, it is crucial to gather the necessary materials to ensure a smooth and successful process.
Essential Tools
The essential tools required for restringing include:
| Tool | Purpose |
|---|---|
| Needle-nose pliers | Grasping and manipulating the string end |
| Scissors | Cutting the string to the appropriate length |
| Phillips screwdriver | Removing the trimmer head for access to the spool |
| Replacement weed eater string | The new string used to re-string the trimmer head |
Replacement String Selection
The type of replacement string you choose is important. Lawn Master recommends using a 0.080-inch to a 0.105-inch diameter nylon monofilament string for optimal performance and durability.
Safety Gear
To protect yourself during the restringing process, it is advisable to wear safety gloves and safety glasses to prevent injury from flying debris.
Preparing the String Trimmer Head
Before you begin stringing your Lawn Master weed eater, it’s important to prepare the trimmer head. Here’s how:
- Disconnect the spark plug: Safety first! Always disconnect the spark plug before handling the trimmer head.
- Remove the bolt or cap: Depending on your trimmer model, you’ll need to remove a bolt or cap to access the trimmer head.
- Extract the empty spool: Once the bolt or cap is removed, you can pull out the empty spool from the trimmer head.
- Clean the trimmer head: Use a brush or cloth to remove any debris or old string from the trimmer head.
Feeding the Line into the Trimmer Head
To feed the line into the trimmer head, follow these detailed steps:
1. Wear Gloves and Safety Goggles
For safety, it is crucial to wear gloves and safety goggles before handling the trimmer line. This will protect your hands and eyes from any potential injuries.
2. Open the Trimmer Head
Locate the trimmer head’s release button or mechanism. Press or squeeze it to open the head and expose the line insertion hole.
3. Unwind the Trimmer Line
Unwind approximately 6-8 feet of trimmer line from the spool or pre-cut segment. Avoid unwinding too much line, as it can become tangled or kinked.
4. Thread the Line Through the Insertion Hole
With the trimmer head open, feed the end of the trimmer line through the designated insertion hole. Ensure the line is straight and untwisted as you insert it.
5. Pull the Line Through the Trimmer
Once the line is threaded through the insertion hole, gently pull it through the trimmer’s channel or hole. Guide the line until it reaches the exit point, which is usually located near the bottom of the trimmer head.
6. Insert the Line into the Spool or Grommet
As you pull the line through the trimmer, insert the end of it into the spool or grommet inside the trimmer head. This helps to secure the line and prevent it from unwinding too quickly.
7. Close the Trimmer Head
Once the line is fed through the trimmer and secured, close the trimmer head by pressing or squeezing the release button or mechanism back into place. Ensure the head is securely closed to prevent the line from slipping out.
Adjusting the Line Length
Adjusting the line length on your Lawn Master weed eater is important for achieving optimal cutting performance. The correct line length will vary depending on the type and size of vegetation you’re cutting.
To adjust the line length, follow these steps:
-
Turn off the weed eater and allow it to cool down.
-
Locate the line trimmer head.
-
Find the adjustment knob or lever on the trimmer head.
-
Turn or slide the adjustment knob or lever to shorten or lengthen the line.
-
Detailed Guide to Adjusting Line Length:
- Step 1: Determine Desired Line Length: Consider the vegetation you’re cutting. For tough weeds, you’ll need a longer line (6-8 inches). For delicate plants, use a shorter line (4-6 inches).
- Step 2: Check Line Spools: Ensure that both line spools have equal amounts of line wound around them.
- Step 3: Adjust Spools: If one spool has more line than the other, use pliers to carefully unwind the excess line.
- Step 4: Check Line Loops: Thread the ends of the line through the line loops in the slots on both sides of the trimmer head.
- Step 5: Set Length: Gently pull on the line until it extends to the desired length. Secure it in place by tightening the adjustment knob or lever.
| Line Length | Vegetation Type |
|---|---|
| 6-8 inches | Tough weeds |
| 4-6 inches | Delicate plants |
Running the Trimmer to Distribute the Line
Once the line is released, start the trimmer and allow it to run for a few seconds. The centrifugal force created by the spinning head will distribute the line evenly around the spool. Make sure to keep the trimmer running at a moderate speed while doing this, as running it too fast can cause the line to tangle.
Steps to Run the Trimmer for Line Distribution:
| Step | Action |
|---|---|
| 1 | Start the trimmer and allow it to run for 2-3 seconds. |
| 2 | Observe the line distribution. |
| 3 | If the line is evenly distributed, proceed to the next step. |
| 4 | If the line is not evenly distributed, allow the trimmer to run for a few more seconds. |
| 5 | Repeat steps 1-4 until the line is evenly distributed. |
| 6 | Adjust the line length: Once the line is evenly distributed, adjust the line length to the desired cutting height. To do this, tap the trimmer head lightly on the ground while it is running. The line will automatically adjust to the correct length. |
Checking Line Tension and Adjust Accordingly
Proper line tension is crucial for optimal performance. Check the tension by lightly pulling on the line while holding the trimmer off the ground. The line should extend about 2 inches (5 cm) beyond the trimmer head. If the line is too loose, it will whip and tangle easily. If the line is too tight, it can break prematurely or damage the trimmer head.
Adjusting Line Tension
To adjust the line tension, follow these steps:
1. Stop the trimmer and disconnect the power source.
2. Loosen the wingnut on the trimmer head.
3. Rotate the trimmer head (normally counterclockwise) until the line tension is correct.
4. Tighten the wingnut.
| Tool | Adjustment |
| Lawn Master Trimmer | Rotate the trimmer head (normally counterclockwise) until the line tension is correct |
Troubleshooting Line Issues
If you are having trouble with your Weed Eater Lawn Master not stringing properly, there are a few things you can check.
1. Is the line the correct size?
The Lawn Master can only accommodate a 0.8-millimeter line.
2. Is the line wound in the correct direction?
The line should be wound clockwise around the spool.
3. Is the spool cap on tight enough?
The cap should be tightened until it clicks into place.
4. Is the bump knob depressed?
The bump knob must be depressed while pulling the string out.
5. Is the line stuck in the eyelets?
Check the eyelets for any debris that may be causing the line to catch.
6. Is the trimmer blade damaged?
A damaged blade can cause the line to break prematurely.
7. Is the trimmer head overfilled with line?
Overfilling the head with line can cause it to bind and prevent the line from feeding properly.
8. Is the spring inside the trimmer head worn out or damaged?
A worn-out or damaged spring can cause the line to feed too slowly or not at all. To replace the spring, follow these steps:
- Remove the spool cap.
- Pull the line out of the trimmer head.
- Remove the old spring.
- Insert the new spring into the trimmer head.
- Wind the line onto the spool.
- Replace the spool cap.
Safety Precautions while Stringing
Before you begin stringing your Lawn Master weed eater, it’s crucial to take the following safety precautions to prevent injury or damage to the equipment.
1. Wear Appropriate Clothing
Wear long pants, closed-toe shoes, safety glasses, and gloves to protect yourself from flying debris and sharp blades.
2. Disconnect Power
Unplug the weed eater from the power outlet or remove the battery before handling the string.
3. Clear the Work Area
Remove any objects or obstacles from the work area to prevent tripping or accidentally cutting anything.
4. Inspect the String
Check the string for any damage or kinks before using it. Damaged string can snap and cause injury.
5. Secure the Weed Eater
Place the weed eater on a stable surface or use a vise to hold it securely while stringing.
6. Use the Correct String
Refer to your weed eater’s user manual for the recommended string diameter and type.
7. Test the String Tension
After stringing the weed eater, test the tension by pulling on the string. It should feel taut but not overly tight.
8. Avoid Overtightening
Overtightening the string can put unnecessary strain on the motor and cause damage.
9. Use a Stringing Assistant
If you have difficulty stringing the weed eater manually, consider using a stringing assistant tool. These devices wind the string onto the spool evenly and ensure proper tension.
Follow these additional tips for using a stringing assistant:
| Step | Description |
|---|---|
| 1 | Hold the stringing assistant in one hand and insert the hook into the spool hole. |
| 2 | Wrap the string around the hook in a clockwise direction. |
| 3 | Insert the other end of the string into the eyelet at the end of the string line. |
| 4 | Slowly pull the stringing assistant through the spool hole to wind the string evenly. |
| 5 | Release the hook and check the string tension. |
Maintaining the String Trimmer Line
Maintaining the string trimmer line is crucial for optimal performance and longevity of your Lawn Master string trimmer. Here are some tips to help you keep your line in top condition:
1. **Choose the right line:** Different types of strings are designed for specific applications. For example, thicker lines are suitable for heavy-duty trimming, while thinner lines are better for precision trimming. Refer to your trimmer’s manual for the recommended line type.
2. **Adjust the line length:** The length of the line should extend approximately 2-4 inches beyond the trimmer’s head. If the line is too short, it won’t reach the vegetation you’re trimming; if it’s too long, it can tangle or whip.
3. **Wind the line correctly:** Hold the spool steady and wind the line in the direction indicated by the arrows on the spool. Avoid overwinding or crossing the line, as this can cause tangling.
4. **Advance the line regularly:** As you trim, the line will gradually wear down and shorten. To maintain optimal cutting performance, advance the line periodically by tapping the trimmer’s head on the ground while the motor is running.
5. **Replace the line when necessary:** When the line is too short or worn out, it’s time to replace it. Remove the old line by cutting it off close to the spool and following the instructions in your trimmer’s manual for installing new line.
6. **Check for damage:** Regularly inspect your string trimmer line for any signs of damage, such as cuts, nicks, or fraying. Damaged line can snap or tangle, so it’s important to replace it promptly.
7. **Clean the line:** If you notice buildup of grass or debris on your string trimmer line, remove it using a soft cloth or brush. Clean line cuts more efficiently and reduces the risk of tangling.
8. **Store the line properly:** When not in use, store the string trimmer line in a dry and cool place. Avoid storing it in direct sunlight or high temperatures, as this can damage the line.
9. **Use a line cutter:** Using a purpose-built line cutter can help you create clean, even cuts on your string trimmer line. This improves cutting performance and reduces the risk of fraying or tangling.
10. **Replace the spool assembly:** If the line is frequently tangling or failing due to a faulty spool assembly, it may need to be replaced. Consult your trimmer’s manual for instructions on removing and replacing the spool assembly.
How To String A Weed Eater Lawn Master
Stringing a weed eater Lawn Master is a simple process that can be completed in a few minutes. This task involves replacing the old trimmer line, which can become worn or damaged over time. By following a few easy steps, you can ensure that your weed eater is operating efficiently and effectively.
Before you begin the stringing process, it is important to gather the necessary materials. You will need a new trimmer line, which is typically made of nylon and comes in various diameters. The diameter of the trimmer line will vary depending on the specific model of weed eater you have. It is important to check your weed eater’s user manual to determine the appropriate diameter for your machine.
Once you have gathered the necessary materials, you can proceed with the following steps:
- Unplug the weed eater from the power source and allow it to cool down completely.
- Locate the trimmer head on the weed eater. This is the part of the machine that houses the trimmer line.
- Press the release button on the trimmer head and remove the cover. This will expose the trimmer line spool.
- Remove the old trimmer line from the spool. If the old trimmer line is still intact, you can simply pull it out of the spool.
- Cut a new piece of trimmer line to the desired length. The length of the trimmer line will vary depending on the specific model of weed eater you have. It is important to check your weed eater’s user manual to determine the appropriate length for your machine.
- Insert the new trimmer line into the spool. The trimmer line should be wound around the spool in a clockwise direction.
- Replace the trimmer head cover and insert the trimmer head onto the weed eater.
- Wind the trimmer line out of the trimmer head by pulling on it. This will help to ensure that the trimmer line is properly tensioned.
- Plug the weed eater into the power source and start it up.
- Gradually increase the speed of the weed eater until you reach the desired cutting speed.
People Also Ask About How To String A Weed Eater Lawn Master
How often should I restring my weed eater Lawn Master?
The frequency with which you need to restring your weed eater Lawn Master will depend on the amount of use it gets. However, as a general rule, it is a good idea to restring your weed eater every 2-3 months or after every 20-30 hours of use.
What type of trimmer line should I use for my weed eater Lawn Master?
The type of trimmer line you should use for your weed eater Lawn Master will depend on the specific model of weed eater you have. It is important to check your weed eater’s user manual to determine the appropriate type of trimmer line for your machine.
How long should my trimmer line be?
The length of your trimmer line will depend on the specific model of weed eater you have. It is important to check your weed eater’s user manual to determine the appropriate length of trimmer line for your machine.
Is it difficult to restring a weed eater Lawn Master?
No, restringing a weed eater Lawn Master is not difficult. By following the steps outlined above, you can restring your weed eater in just a few minutes.
