5 Simple Steps to Ollie with a Fingerboard

Ollie with Fingerboard

Embark on an exhilarating journey as we delve into the intricacies of mastering the legendary Ollie with your fingerboard. This iconic trick, a cornerstone of fingerboarding, will elevate your skills to new heights. Picture yourself effortlessly propelling your fingerboard into the air, defying gravity with style and precision. As your fingertip caresses the board, it’s a symphony of control and finesse. Get ready to unlock the secrets of the Ollie and become a fingerboarding virtuoso.

To initiate the Ollie, position your front finger on the nose of the board and your back finger on the tail. Crouch slightly, bending your knees and keeping your back straight. With lightning speed, flick your wrist forward while simultaneously pressing down on the tail with your back finger. This will generate the momentum necessary for the board to pop into the air. As the board ascends, slide your front finger forward to level it out. Don’t be discouraged if it takes several attempts to master the timing and coordination. Practice makes perfect, and before you know it, you’ll be executing the Ollie with effortless grace.

Once you’ve grasped the Ollie, a world of possibilities unfolds. You can combine it with other tricks like the kickflip or varial flip to create complex and impressive combos. Whether you’re cruising the streets, shredding on a mini ramp, or competing in fingerboarding events, the Ollie is an essential skill that will take your fingerboarding to the next level. So, gather your fingerboard, embrace the spirit of adventure, and embark on this exciting journey to Ollie mastery. Your fingers will thank you for it!

$title$

The Basics of an Ollie

The ollie is one of the most fundamental tricks in fingerboarding. It’s a jumping trick that allows you to clear obstacles and perform a variety of other moves. To perform an ollie, you’ll need to follow these steps:

Pop the tail. This is the first and most important step in performing an ollie. To pop the tail, simply press down on the tail of your fingerboard with your back finger. This will cause the tail to snap down and the nose to pop up.
Slide your front finger. As the tail pops, quickly slide your front finger up the grip tape towards the nose. This will help to level out the board and keep it from flipping over.
Jump. As your front finger reaches the nose, jump up with your back finger. This will help to give the ollie some height.
Level out. Once you’ve jumped, quickly level out the board by sliding your front finger back down the grip tape. This will help to keep the board from flipping over.
Land. Once the board is level, land on it with both of your fingers. You should land with your back finger on the tail and your front finger on the nose.

Here’s a table summarizing the steps involved in performing an ollie:

Setting Up Your Fingerboard

To get started with fingerboarding, you’ll need a fingerboard, a set of trucks, and a deck. You can find these at most skate shops or online. Once you have your equipment, you’ll need to set it up properly.

Trucks

The first step is to attach the trucks to the deck. The trucks should be placed about 1/3 of the way down the deck from the nose and tail. To attach the trucks, use the screws that came with the trucks. Tighten the screws until the trucks are secure, but don’t overtighten them.

Wheels

Once the trucks are attached, you can add the wheels. The wheels should be placed on the axles of the trucks. To attach the wheels, use the nuts that came with the wheels. Tighten the nuts until the wheels are secure, but don’t overtighten them.

Grip Tape

The final step is to add grip tape to the deck. Grip tape provides traction for your fingers, making it easier to control the fingerboard. To apply grip tape, simply peel off the backing and stick it to the deck. Smooth out the grip tape with your fingers or a credit card.

Basic Tricks

Once your fingerboard is set up, you can start practicing some basic tricks. The first trick to learn is the ollie. The ollie is a fundamental trick that allows you to jump and land the fingerboard on its tail.

How to Ollie

To ollie, follow these steps:

1. Place your front finger on the nose of the fingerboard and your back finger on the tail.
2. Bend your knees and then quickly flick your back finger down while simultaneously popping the nose of the fingerboard with your front finger.
3. As the fingerboard jumps into the air, slide your front finger forward to level it out.
4. Land the fingerboard on its tail and roll away.

The ollie is a difficult trick to master, but with practice, you’ll be able to do it consistently. Once you’ve mastered the ollie, you can start learning other tricks, such as the kickflip, the heelflip, and the varial flip.

Foot Placement and Preparation

Before attempting an ollie, it is crucial to ensure proper foot placement and preparation. This foundation will significantly improve your chances of executing a successful trick.

Foot Placement

1. **Front Foot**: Position your front foot parallel to the board, slightly behind the front bolts. The heel should be hanging partially over the edge to allow for greater control during the pop.
2. **Back Foot**: Place your back foot behind the rear bolts, with the ball of your foot resting on the tail. The toes should be pointing slightly outward, providing stability and leverage.

Leg Position

1. **Bend Knees**: Keep your knees bent and slightly wider than shoulder-width apart. This position will provide a solid base and allow you to generate power for the pop.
2. **Relax Ankles**: Keep your ankles relaxed and ready to move quickly. Avoid locking them, as this will restrict your range of motion.
3. **Engage Core**: Tighten your core muscles to stabilize your body and maintain balance throughout the trick.

Foot	Placement
Front	Parallel to the board, slightly behind front bolts, heel partially hanging over edge
Back	Behind rear bolts, ball of foot on tail, toes slightly outward

The Flicking Motion

The flicking motion is the most important part of ollie. Without a proper flick, you won’t be able to get your board to pop and level out.

To perform the flicking motion, you first need to place your middle finger on the tail of the board. Then, push your middle finger down hard and flick your wrist up. This will cause the tail of the board to pop and the nose to level out.

The key to a good flick is to flick your wrist quickly and with precision. If you flick your wrist too slowly, the board will not pop. If you flick your wrist too hard, the board will over-rotate. With practice, you will be able to find the sweet spot and perform ollies consistently.

Here are some tips for performing the flicking motion:

	Tips
1.	Keep your wrist straight.
2.	Flick your wrist quickly and with precision.
3.	Don’t flick your wrist too hard or too soft.

With practice, you will be able to master the flicking motion and perform ollies consistently.

Leveling the Board

The key to a successful ollie lies in leveling the board. This involves rotating the board on its side while keeping it parallel to the ground. Here are the steps involved in leveling the board:

Prepare the Board: Place the fingerboard on its side with the tail slightly elevated.
Position Your Fingers: Place your index finger on the nose and your middle finger on the tail.
Flick the Nose: While keeping the board level, quickly flick the nose upwards with your index finger.
Simultaneously Jump: As you flick the nose, use your middle finger to jump the board off the ground.
Guide the Board: Once the board is in the air, use your middle finger to guide it until it levels out parallel to the ground.

When leveling the board, pay attention to the following:

Description	Tips
Flicking Speed:	The flick should be swift and accurate to generate the necessary momentum.
Board Rotation:	Keep the board parallel to the ground throughout the rotation to prevent it from flipping over.
Finger Placement:	Position your fingers close to the edges of the board for maximum control and leverage.
Jumping Timing:	Jump at the same time as you flick the nose to give the board the necessary lift.
Guiding the Board:	Use a light touch to guide the board without disturbing its balance.

Sliding Your Fingers

The most important part of ollieing is sliding your fingers. Once the tail of the board has hit the ground, you need to quickly slide your front finger up the board. This will cause the board to pop up into the air. The timing and speed of your finger slide is critical. If you slide your finger too soon, the board will not pop up high enough. If you slide your finger too late, the board will not pop up at all.

As you become more comfortable sliding your fingers, you can start experimenting with different ways to pop the board. For example, you can try sliding your finger up the board at an angle to create a varial flip. Or, you can try sliding your finger up the board in a flicking motion to create a kickflip.

Here are some tips for sliding your fingers:

1. Use your front finger.
2. Slide your finger up the board at a 45-degree angle.
3. The slide your finger quickly and smoothly.
4. Don’t overslide your finger.
5. The keep your finger on the board until the nose of the board has reached its peak height.
6. **Advancing Your Finger Slide**
7. **Flicking Motion:** Instead of a traditional upward slide, try flicking your finger forward and downward. This will erzeugen a kickflip motion, causing the board to rotate 360 degrees in the vertical plane.
8. **Varial Flip:** Slide your finger diagonally across the board, starting from the tail and moving towards the nose. As you slide, slightly twist your wrist to create a spinning motion, resulting in a varial flip (a 360-degree rotation on the horizontal axis).
9. **Shove-It:** Slide your finger in a parallel motion along the board’s edge, pushing it either forward or backward. This will cause the board to perform a shove-it, rotating 180 degrees around its vertical axis.

Timing and Coordination

1. Position your fingers correctly

Place your front finger just behind the front truck, and your back finger on the tail of the board. Make sure your fingers are parallel to the board and slightly angled.

2. Pop the tail

Quickly flick your back finger down to hit the tail of the board against the ground. This will cause the board to pop up into the air.

3. Slide your front finger

As the board pops up, slide your front finger forward along the board towards the nose. This will level out the board and give it momentum.

4. Level out the board

Once your front finger reaches the nose, push it down slightly to level out the board. This will help stabilize the board in the air.

5. Land on the bolts

As the board comes back down, land your fingers on the bolts to absorb the impact and keep the board under control.

6. Practice makes perfect

Mastering the ollie takes time and practice. Don’t get discouraged if you don’t get it right away. Just keep practicing and you’ll eventually get the hang of it.

7. Different variations

Once you’ve mastered the basic ollie, you can start experimenting with different variations.

8. Troubleshooting

If you’re having trouble performing the ollie, here are a few tips:

Make sure you’re popping the tail hard enough. The harder you pop, the higher the board will go.
Slide your front finger forward as quickly as possible. This will help level out the board and give it momentum.
Level out the board completely. If the board is not level, it will flip or spin out of control.
Land on the bolts. This will help absorb the impact and keep the board under control.

Practice and Repetition

Ollieing with a fingerboard is a difficult trick that takes time and practice to master. The key is to be patient and persistent. With enough practice, you’ll be able to ollie with ease.

Tips for practicing ollies

Find a flat, open space to practice in. You don’t want to be hindered by obstacles while you’re learning.
Start by practicing the footwork. Place your front foot on the front of the board and your back foot on the tail. Practice flicking your back foot down and sliding it back up the board.
Once you’ve got the footwork down, start adding the pop. Pop the board by pressing down on the tail with your back foot and then releasing it quickly.
As the board pops, slide your front foot forward and level it out. This will help the board to stay level in the air.
Land on both feet simultaneously. Bend your knees to absorb the impact and keep the board from slipping out from under you.
Repeat these steps until you’re able to ollie consistently. It may take some time, but with enough practice, you’ll get there.

9. Troubleshooting

If you’re having trouble ollieing, here are a few tips:

The board isn’t popping: Make sure you’re pressing down on the tail with enough force. You should also try flicking your back foot down faster.

The board is flipping: This means you’re flicking your back foot too hard. Try flicking it down more gently.

The board isn’t staying level in the air: This means you’re not sliding your front foot forward enough. Try sliding it forward more forcefully.

You’re landing on one foot: This means you’re not bending your knees enough. Bend your knees to absorb the impact and keep the board from slipping out from under you.

How To Ollie With Fingerboard

To ollie with a fingerboard, you need to follow these steps:

Place your front finger on the nose of the board and your back finger on the tail.
Push down on the tail with your back finger and flick your wrist forward.
As the board pops into the air, slide your front finger forward to level it out.
Land on the board with both fingers and roll away.

With practice, you’ll be able to ollie higher and smoother.