The Necessary Materials
Assembling a geeb requires a handful of easily accessible materials. The primary components include:
- Water bottle: Select a plastic water bottle with a large opening (e.g., 20-ounce or larger). The bottle will serve as the main body of the geeb.
- Socket head screw: Choose a socket head screw that snugly fits the water bottle’s opening. It will act as the base of the geeb, providing stability.
- Screwdriver: Locate a screwdriver that corresponds to the socket head screw. It will be used to drive the screw into the bottle’s opening.
- Bottle cap: The bottle cap from the water bottle serves as the mouthpiece for the geeb.
- Bowl: A small bowl made of glass or metal is needed for holding the smoking material.
- Foil: Aluminum foil is used to create a makeshift carb (hole) on the side of the water bottle, allowing for air intake and controlling the smoke flow.
Creating the Mouthpiece
The mouthpiece of the geeb is the part that you will place your mouth on to inhale the smoke. It is important to create a mouthpiece that is comfortable to use and that will not leak smoke.
To create the mouthpiece, you will need a small piece of cardboard or thick paper. Cut the cardboard or paper into a rectangle that is about 2 inches wide and 4 inches long. Fold the rectangle in half lengthwise, and then unfold it. Roll the cardboard or paper tightly around a pencil or pen, starting from one of the short ends. Once you have rolled the cardboard or paper all the way around, secure it with tape. The mouthpiece is now complete.
If you want to make the mouthpiece more comfortable to use, you can cover it with a piece of soft cloth or felt. You can also add a small bead or other decoration to the end of the mouthpiece.
Here are some additional tips for creating a geeb mouthpiece:
| Tip | Description |
|---|---|
| Use a thick piece of cardboard or paper. | This will help to prevent the mouthpiece from collapsing or tearing. |
| Roll the cardboard or paper tightly around a pencil or pen. | This will help to create a mouthpiece that is secure and leak-free. |
| Secure the mouthpiece with tape. | This will help to prevent the mouthpiece from unraveling. |
| Cover the mouthpiece with a piece of soft cloth or felt. | This will make the mouthpiece more comfortable to use. |
| Add a small bead or other decoration to the end of the mouthpiece. | This will add a personal touch to your geeb. |
Attaching the Mouthpiece
Once the bottle has been cut and the cone is placed, it’s time to attach the mouthpiece. This is a critical step, as a poorly attached mouthpiece can result in a leaky or ineffective geeb.
Methods for Attaching the Mouthpiece
| Method | Description |
|---|---|
| Tape | Use duct tape or electrical tape to wrap around the base of the mouthpiece and the top of the bottle. Ensure the tape is tight and secure to prevent leaks. |
| Glue | Apply a strong adhesive, such as epoxy or cyanoacrylate (super glue), to the base of the mouthpiece and the top of the bottle. Allow the glue to dry completely before using the geeb. |
| Socket Connection | Create a snug fit between the mouthpiece and the bottle by carving or fitting the mouthpiece into the bottle’s opening. This method provides a more durable and secure connection but may require some additional effort. |
| Friction Fit | For bottles with a slightly smaller opening than the mouthpiece, try inserting the mouthpiece into the opening and twisting it to create friction. This method may provide a temporary connection but is not as secure as the other methods. |
Regardless of the method chosen, ensure that the mouthpiece is firmly attached and there are no leaks before using the geeb. A well-sealed mouthpiece will prevent smoke from escaping and enhance the overall functionality of the device.
Carving a Carb Hole
Carving a carb hole in the apple is crucial for creating a functional geeb. Here’s a step-by-step guide:
Step 1: Identifying the Hole Location
Select the topmost part of the apple, which provides ample space for the carb hole and allows for easy airflow.
Step 2: Removing the Core
Using a corer or knife, carefully remove the apple’s core to create a cavity. Ensure you carve deep enough to reach about halfway through the apple, but not too deep to damage the skin.
Step 3: Determining the Carb Hole Size
The carb hole should be approximately 0.25-0.5 inches in diameter. A smaller hole provides more suction, while a larger hole allows for better airflow.
Step 4: Marking the Hole
Use a pen or marker to lightly mark the desired location and size of the carb hole on the apple’s skin.
Step 5: Using a Sharp Knife
Hold the apple firmly and carefully insert a sharp knife into the marked carb hole. Rotate the knife gently to carve a circular hole.
Step 6: Deepening the Hole
Once the hole is established, slowly deepen it by rotating the knife and pressing it gradually downward. Ensure the hole is slightly wider at the bottom to create a funnel effect.
Step 7: Finishing the Carb Hole
Smooth the edges of the carb hole using a small knife or a rounded metal spoon. This will create a clean and functional opening for airflow control.
