The Bissell Proheat Pet Turbo is a powerful carpet cleaner that is specifically designed to remove pet hair and stains. It features a large capacity tank and a variety of attachments to make cleaning your carpets easy and efficient. In this article, we will provide you with step-by-step instructions on how to use the Bissell Proheat Pet Turbo. We will also provide some tips on how to get the most out of your carpet cleaner.
Before you begin using the Bissell Proheat Pet Turbo, it is important to read the instructions carefully. This will help you to avoid any damage to your carpets or the machine itself. Once you have read the instructions, you can begin by filling the clean water tank with hot water. Then, add the appropriate amount of carpet cleaning solution to the tank. Next, attach the appropriate cleaning head to the machine. There are two different cleaning heads available: a hard floor cleaning head and a carpet cleaning head.
Assembly Instructions
**1. Attach the Cleaning Head**
Begin by inserting the bottom of the cleaning head into the base of the cleaner. Align the tabs on the cleaning head with the grooves on the cleaner base, and slide the head up until it clicks into place. Ensure that the head is firmly secured before proceeding.
**2. Insert the Handle**
Locate the handle and insert it into the upper receptacle on the cleaner body. Align the handle’s groove with the receptacle’s ridge and slide it down until it clicks into position. Adjust the handle to the desired height for comfortable operation.
**3. Attach the Water Tank**
Take the water tank and align it with the designated area on the cleaner’s body. Insert the tank by pushing it straight into place until it snaps into position securely. Ensure that the tank is firmly connected before filling it with water.
**4. Fill the Water Tank**
Locate the water fill port on the top of the cleaner and remove the cap. Use clean tap water to fill the tank to the indicated fill line. Replace the cap securely once filled. Avoid using hot water or detergents, as they can damage the cleaner.
**5. Insert the Cleaning Solution**
Identify the cleaning solution compartment on the cleaner body. Open the compartment and pour the provided cleaning solution into the designated area. Follow the dosage instructions on the cleaning solution label. Close the compartment securely after dispensing the solution.
**6. Connect the Power Cord**
Unwind the power cord and plug it into a grounded electrical outlet. Ensure that the cord is free of any obstructions or damage before operating the cleaner.
Adding Cleaning Solution
Follow these steps to add cleaning solution to your Bissell Proheat Pet Turbo:
1. Remove the solution tank from the machine by pressing the release button on the back.
2. Fill the tank with warm water to the “Clean” line. 3. Add 4 ounces of the Bissell Pet Pro Carpet Cleaning Solution to the tank.
4. Replace the solution tank in the machine and secure it by pressing down on the top.
5. Press the “Clean” button on the machine to start cleaning.
Additional Details for Adding Cleaning Solution
Here are some additional details to help you add cleaning solution to your Bissell Proheat Pet Turbo:
- Use only Bissell Pet Pro Carpet Cleaning Solution in your machine. Other cleaning solutions may damage the machine.
- Do not overfill the solution tank. Overfilling can cause the machine to leak.
- If you are using a different type of carpet cleaning solution, follow the instructions on the bottle for mixing and use.
- If you have hard water, you may need to add a water softener to the solution tank. This will help to prevent mineral buildup in the machine.
Table of Carpet Cleaning Solution Recommendations
| Carpet Type | Cleaning Solution |
|---|---|
| General Carpeting | Bissell 2X Pet Stain & Odor Carpet Shampoo |
| Upholstery | Bissell Upholstery Pro Carpet & Upholstery Cleaner |
| Hard Floors | Bissell Multi-Surface Floor Cleaner |
Emptying the Dirty Water Tank
Emptying the dirty water tank is crucial to maintain the cleanliness and effectiveness of your Bissell Proheat Pet Turbo. Follow these steps for efficient emptying:
- Disconnect the power cord from the electrical outlet and allow the machine to cool down.
- Locate the dirty water tank, usually situated at the back of the machine.
- Remove the dirty water tank by pressing the release button or lever.
- Carry the dirty water tank to a sink or bathtub.
- Press the drain plug or button to empty the dirty water into the drain.
- Rinse the dirty water tank thoroughly with clean water.
- Optional: If desired, add a few drops of the Bissell 2X Pet Pro Oxy Formula to the empty tank for additional cleaning power.
- Replace the dirty water tank by aligning it with the machine and pressing it back into place until it clicks.
Troubleshooting Common Problems
Problem: Vacuuming up pet hair leaves the carpet or floor damp.
Solution: Adjust the suction level to “low” or “pet” mode. If the dampness persists, check the dirty water tank and empty it if necessary.
Problem: The vacuum is not picking up dirt and debris.
Solution: Clean the brush roll and filter regularly. Also, check the suction hose for any blockages.
Problem: The vacuum is leaking water.
Solution: Check the clean water tank and make sure it is tightly sealed. Tighten the hose connections and ensure that there are no cracks or punctures in the tank or hose.
Problem: The vacuum is making a loud noise.
Solution: Check the brush roll for obstructions and remove any debris. If the noise persists, contact customer support.
Problem: The vacuum is not turning on.
Solution: Check that the vacuum is plugged into a working outlet. Reset the circuit breaker or replace the fuse if necessary.
Problem: The vacuum is not cleaning effectively.
Solution: Adjust the cleaning mode to “Deep Clean” or “Max Clean.” Use the appropriate cleaning solution for the surface being cleaned.
Problem: The vacuum is leaving streaks on the carpet or floor.
Solution: Check the brush roll and replace it if it is worn or damaged. Adjust the flow rate of the cleaning solution.
Bissell Proheat Pet Turbo: A Comprehensive Guide on Usage
The Bissell Proheat Pet Turbo is a powerful and versatile carpet cleaner designed to tackle the unique challenges of pet ownership. Its advanced features and easy-to-use design make it an ideal solution for homes with pets. This guide will provide step-by-step instructions on how to use the Bissell Proheat Pet Turbo effectively.
- Prepare the Area: Remove any loose objects or furniture from the area to be cleaned. Ensure the carpet is thoroughly vacuumed to remove any loose dirt or debris.
- Assemble the Cleaner: Attach the carpet cleaning solution tank and water tank to the cleaner. Insert the cleaning solution into the designated compartment and fill the water tank with clean water.
- Select the Cleaning Mode: The Bissell Proheat Pet Turbo offers two cleaning modes: Carpet Clean and Express Clean. Choose the appropriate mode based on the level of cleaning required.
- Pretreat Stains: If there are any stubborn stains on the carpet, pretreat them using the Bissell Pet Stain & Odor Eliminator. Spray the cleaner on the stain and allow it to penetrate for a few minutes before proceeding with cleaning.
- Begin Cleaning: Start by making slow, overlapping passes over the carpet area. Pay special attention to any high-traffic or heavily soiled areas.
- Rinse and Dry: After each cleaning pass, rinse the carpet by releasing only the water from the cleaner. Avoid over-rinsing, as it can leave the carpet too wet. Allow the carpet to air dry or use a fan to speed up the drying process.
- Maintenance: After use, empty both the dirty water and cleaning solution tanks. Rinse the tanks and the hose thoroughly with clean water. Store the cleaner in a dry and upright position.
People Also Ask About Bissell Proheat Pet Turbo How To Use
What is the difference between Carpet Clean and Express Clean modes?
The Carpet Clean mode provides a deeper and more thorough cleaning, while the Express Clean mode is a faster and lighter clean suitable for smaller areas or quick touch-ups.
How often should I clean my carpets using the Bissell Proheat Pet Turbo?
The frequency of cleaning will depend on the level of pet activity and traffic in the household. For homes with pets, it is recommended to clean carpets at least once every 1-2 months.
What kind of cleaning solution should I use?
The Bissell Proheat Pet Turbo is designed to use Bissell cleaning solutions specifically formulated for pet stains and odors. These solutions contain enzymes that help break down and remove pet stains and odors.
Can I use the Bissell Proheat Pet Turbo on other surfaces?
The Bissell Proheat Pet Turbo is a dedicated carpet cleaner. It is not recommended for use on other surfaces, such as hard floors or upholstery.
