Your carpets are a significant investment, and you want to keep them looking their best. Regular shampooing is essential for maintaining their appearance and extending their lifespan. While you can rent a rug shampooer from your local hardware store, it is often more convenient and cost-effective to purchase your own. Bissell is a leading manufacturer of rug shampooers, and their products are known for their quality and ease of use. In this article, we’ll provide step-by-step instructions on how to use a Bissell rug shampooer, so you can keep your carpets looking their best for years to come.
Before you begin shampooing your carpets, it is important to prepare them properly. First, vacuum the carpets thoroughly to remove any loose dirt or debris. Next, pre-treat any stains or heavily soiled areas with a carpet cleaning solution. Allow the solution to sit for the amount of time specified on the product label, then blot up any excess solution with a clean cloth. Finally, fill the Bissell rug shampooer with hot water and the recommended amount of carpet cleaning solution.
Once the Bissell rug shampooer is filled, you are ready to begin shampooing your carpets. Start by selecting the appropriate setting for your carpet type. Bissell rug shampooers have different settings for different types of carpets, so be sure to consult the user manual before you begin. Once you have selected the appropriate setting, turn on the Bissell rug shampooer and slowly push it back and forth over the carpet. Be sure to overlap your passes to ensure that the entire carpet is cleaned evenly. As you shampoo the carpet, the dirty water will be collected in the Bissell rug shampooer’s dirty water tank. When the dirty water tank is full, empty it and rinse it out with clean water. Continue shampooing the carpet until all of the dirty water has been removed.
How To Use A Bissell Rug Shampooer
Bissell rug shampooers are a great way to clean your carpets and rugs, and they’re relatively easy to use. Here are the steps on how to use a Bissell rug shampooer:
- Fill the clean water tank. The clean water tank is usually located on the front of the shampooer. Fill it with warm water and add the recommended amount of Bissell cleaning solution.
- Attach the cleaning head. The cleaning head is usually attached to the front of the shampooer. Make sure it’s securely attached before you start cleaning.
- Turn on the shampooer. The power switch is usually located on the back of the shampooer. Turn it on and select the desired cleaning setting.
- Start cleaning. Slowly push the shampooer forward and backward over the carpet or rug. Be sure to overlap your strokes to ensure that you clean the entire area.
- Rinse the carpet or rug. Once you’ve finished cleaning, rinse the carpet or rug with clean water. To do this, fill the clean water tank with water and turn on the shampooer. Slowly push the shampooer forward and backward over the carpet or rug, just as you did when you were cleaning it.
- Extract the dirty water. Once you’ve finished rinsing the carpet or rug, extract the dirty water. To do this, turn off the shampooer and detach the dirty water tank. Empty the dirty water into a sink or toilet.
- Clean the shampooer. Once you’ve finished using the shampooer, clean it. To do this, detach the cleaning head and rinse it with water. Empty the clean water tank and the dirty water tank. Wipe down the exterior of the shampooer with a damp cloth.
People Also Ask About How To Use A Bissell Rug Shampooer
How often should I clean my carpets and rugs?
You should clean your carpets and rugs every 6-12 months, or more often if they’re heavily soiled.
What type of cleaning solution should I use in my Bissell rug shampooer?
You should use a Bissell cleaning solution that is specifically designed for use in Bissell rug shampooers. Do not use other types of cleaning solutions, as they may damage your shampooer.
How do I clean the Bissell rug shampooer?
To clean the Bissell rug shampooer, detach the cleaning head and rinse it with water. Empty the clean water tank and the dirty water tank. Wipe down the exterior of the shampooer with a damp cloth.
