Performing an oil change on your Kia 2022 Seltos is a crucial maintenance task that ensures the longevity and performance of your vehicle. Whether you’re a seasoned DIY enthusiast or a novice seeking to save on maintenance costs, this comprehensive guide will provide you with step-by-step instructions and essential tips to navigate the oil change process effortlessly. By following these detailed instructions, you’ll gain the confidence to maintain your vehicle’s optimal condition while extending its lifespan.
To embark on this essential maintenance task, you’ll require a few basic tools and materials. Gather a new oil filter, the recommended engine oil for your Kia 2022 Seltos, a new washer for the drain plug, a wrench or socket set, an oil filter wrench, a drain pan to collect the used oil, and a funnel for pouring the new oil. With these essentials at your disposal, you can proceed to the next step: preparing your vehicle for the oil change.
Before commencing the oil change, ensure your Kia 2022 Seltos is parked on a level surface and engage the parking brake to prevent any movement. Locate the hood release lever inside the vehicle and raise the hood to access the engine bay. Allow the engine to cool for approximately 30 minutes to prevent burns from hot components. Once the engine has cooled sufficiently, proceed to the next step: locating the oil drain plug and oil filter.
Gather Necessary Tools and Materials
Changing the oil in your 2022 Kia Seltos is a straightforward task that can be completed in about 30 minutes. Before you start, gather the following tools and materials:
- Socket wrench or ratchet with 17mm socket
- Oil filter wrench
- Funnel
- Oil pan
- Gloves
- Safety glasses
Tools:
- 5 quarts of 0W-20 full synthetic motor oil
- New oil filter (Kia part number 26300-35503)
- New drain plug washer (Kia part number 21513-23000)
- Oil absorbent pads (optional)
Materials:
Once you have gathered all of the necessary tools and materials, you can proceed to change the oil in your 2022 Kia Seltos.
| Tool | Description |
| Socket wrench or ratchet with 17mm socket | Used to remove the oil drain plug |
| Oil filter wrench | Used to remove and install the oil filter |
| Funnel | Used to pour new oil into the engine |
| Oil pan | Used to catch the used oil |
| Gloves | Protects your hands from hot oil |
| Safety glasses | Protects your eyes from flying debris |
Safety First: Park and Secure the Vehicle
Before starting any maintenance work on your Kia 2022 Seltos, it’s crucial to prioritize safety. Follow these steps to park and secure your vehicle first:
1. Park on a Level, Stable Surface
Pull your Seltos into a designated parking spot or on a firm, flat surface that ensures stability during the oil change process.
2. Engage the Parking Brake and Place Wheel Chocks
Engage the parking brake firmly to prevent the vehicle from rolling once lifted. Additionally, place wheel chocks or rocks behind the rear wheels of the Seltos to ensure it stays secure while you work underneath.
3. Gather Necessary Tools and Materials
Before raising the vehicle, ensure you have all the necessary tools and materials for the oil change, including a new oil filter, clean rags, a socket wrench set, and fresh motor oil of the specified viscosity.
4. Allow Engine to Cool
It’s essential to wait until your Seltos’s engine has cooled down before performing an oil change. This ensures that the oil is no longer dangerously hot and reduces the risk of burns.
Locate the Engine Oil Drain Plug
The engine oil drain plug is typically located at the bottom of the oil pan, which is the lowest part of the engine. On the 2022 Kia Seltos, the oil pan is made of aluminum and is located under the engine block. To locate the oil drain plug, follow these steps:
- Park the Seltos on a level surface and engage the parking brake.
- Locate the oil pan under the engine block. It is a large, silver-colored pan with a drain plug at the bottom.
- Place an oil drain pan under the oil pan to catch the draining oil.
- Use a 17mm socket wrench to loosen the oil drain plug. Be careful not to overtighten the plug, as this can damage the oil pan.
The oil will begin to drain out of the oil pan. Allow all of the oil to drain out before replacing the drain plug.
| Tool | Size |
|---|---|
| Socket wrench | 17mm |
Position the Drain Pan
Locate the oil drain plug beneath the oil pan. The exact location may vary depending on the specific year and model of your Kia Seltos. It typically appears as a 17mm or 19mm bolt on the bottom of the oil pan. It’s recommended to use a socket wrench or a box wrench to loosen the plug.
Position a drain pan directly beneath the oil drain plug to collect the used oil. Make sure the drain pan is large enough to accommodate the capacity of the oil to be drained. Most Kia Seltos models have an oil capacity between 4.7 to 5.5 quarts. Consider using a pan with a capacity of at least 6 quarts to ensure sufficient space for the drained oil.
You can enhance the accuracy of the oil draining process by elevating the front of the vehicle. This allows the oil to drain more easily and completely from the oil pan. Use appropriate safety measures while elevating the vehicle, such as parking it on a level surface, engaging the parking brake, and using sturdy jack stands or ramps.
| Needed Tools |
|---|
| 17mm or 19mm socket wrench or box wrench |
| Drain pan with a capacity of at least 6 quarts |
| Safety glasses |
| Gloves |
Unscrew the Oil Drain Plug Carefully
Locate the oil drain plug at the bottom of the oil pan. It is usually a 17mm or 19mm bolt head. Using a socket wrench with the appropriate size socket, carefully loosen the oil drain plug by turning it counterclockwise. Do not remove it completely yet.
Place the oil drain pan under the oil drain plug to catch the used oil. Ensure that the pan is large enough to hold all the oil that will drain out. Position the pan slightly off-center to avoid splashing oil on yourself or the vehicle.
Slowly and carefully unscrew the oil drain plug the rest of the way by hand. Be prepared for the oil to start flowing out immediately. Allow the oil to drain completely into the oil drain pan. Depending on the amount of oil in the engine, this may take a few minutes.
Once the oil has stopped draining, replace the oil drain plug by hand-tightening it clockwise. Do not overtighten it, as this can damage the oil pan threads. Use a torque wrench to tighten the oil drain plug to the specified torque, which is typically around 29-35 ft-lbs (40-47 Nm).
To ensure a proper seal, apply a small amount of oil to the washer on the oil drain plug before replacing it. This will help prevent leaks.
| Material | Torque |
|---|---|
| Aluminum Drain Plug | 29-35 ft-lbs (40-47 Nm) |
| Steel Drain Plug | 36-42 ft-lbs (49-56 Nm) |
Allow the Old Oil to Drain Completely
Once the oil pan plug has been loosened, allow the old oil to drain into the oil drain pan completely. This process can take several minutes, so be patient and let all the old oil drain. It is crucial to ensure that all the old oil has been drained to avoid mixing the old and new oil, which can affect the performance and life of the engine.
Tips for Effective Oil Drainage:
1. Park the vehicle on a level surface to ensure proper oil drainage.
2. Place the oil drain pan directly beneath the oil pan plug to catch all the draining oil.
3. Allow the oil to drain for at least 15 minutes, or until a steady stream of oil turns into a slow drip.
4. If the oil does not drain freely or completely, check for any obstructions or leaks in the oil pan or drain plug area.
5. Clean the drain plug and its washer before reinstalling it to prevent leaks.
6. Advanced Tips for Enhanced Drainage:
| Technique | Purpose |
|---|---|
| Raise the Vehicle on Ramps | Elevating the car allows gravity to assist in the draining process, ensuring faster and more complete oil removal. |
| Use a Vacuum Extractor | This device pumps a vacuum into the oil dipstick tube, extracting oil from the engine more quickly and thoroughly. |
| Apply Heat to the Oil Pan | Gently heating the oil pan using a heat gun or hair dryer can warm the oil, reducing its viscosity and facilitating better drainage. |
Replace the Oil Drain Plug and Tighten
Locate the oil drain plug on the oil pan. It is usually a 17mm bolt. Place the oil drain pan under the oil drain plug.
Using a 17mm wrench, carefully loosen the oil drain plug. Do not remove it completely yet.
Allow the oil to drain into the oil drain pan. This may take a few minutes.
Once the oil has drained, clean the oil drain plug and the threads on the oil pan with a clean rag.
Apply a thin layer of motor oil to the threads of the oil drain plug.
Tighten the oil drain plug back into the oil pan. Do not overtighten.
Use a torque wrench to tighten the oil drain plug to 29 ft-lbs.
Wipe away any excess oil from the oil drain plug and the surrounding area.
Dispose of the used oil and oil filter properly.
| Tools Required: |
|---|
| 17mm wrench |
| Oil drain pan |
| Torque wrench |
Locate the Engine Oil Filter
The engine oil filter is located on the side or bottom of the engine, usually near the oil pan. It is a cylindrical-shaped component with a black or metal exterior. It may have a cap or lid that can be removed to access the filter element inside.
To locate the engine oil filter, follow these steps:
1. Park the Kia Seltos on a level surface and engage the parking brake.
2. Open the hood and locate the engine.
3. Identify the oil filter by its cylindrical shape and black or metal exterior.
4. If necessary, follow the oil filter lines from the engine to the filter housing.
If you encounter difficulties locating the engine oil filter, refer to the Kia Seltos owner’s manual for specific instructions.
Additional Details for Steps 3-4:
| 3 | The oil filter is often located on the passenger side of the engine, close to the front or rear. |
|---|---|
| 4 | If you cannot find the oil filter directly from the engine, you can trace the oil filter lines. These lines connect the oil filter to the engine and are usually flexible rubber hoses. |
By following these steps, you will be able to accurately locate the engine oil filter on your 2022 Kia Seltos.
Remove the Old Oil Filter
The old oil filter is located on the bottom of the engine. It is a cylindrical-shaped object with a black cap. To remove the old oil filter, you will need an oil filter wrench.
Place the oil filter wrench on the old oil filter and turn it counterclockwise to loosen it. Once the filter is loose, remove it by hand.
Be careful not to spill any oil when removing the old filter. If you do spill oil, clean it up immediately with a rag.
Before installing the new oil filter, apply a thin layer of new oil to the gasket on the filter. This will help to create a seal and prevent leaks.
Screw the new oil filter onto the engine by hand until it is snug. Do not overtighten the filter.
Once the new oil filter is installed, you can add new oil to the engine. Refer to your vehicle’s owner’s manual for the correct amount of oil to add.
Oil Filter Torque Specifications
| Engine | Torque |
|---|---|
| 1.6L GDI | 24 ft-lbs |
| 2.0L MPI | 29 ft-lbs |
| 1.6L Turbo GDI | 29 ft-lbs |
Install the New Oil Filter
1. Locate the oil filter housing, which is usually a black or silver canister near the top of the engine.
2. Place the oil drain pan underneath the oil filter housing.
3. Use an oil filter wrench to loosen the oil filter. Be careful not to overtighten the filter.
4. Remove the old oil filter and discard it.
5. Rub a small amount of new oil on the gasket of the new oil filter.
6. Screw the new oil filter onto the housing by hand until it is snug.
7. Tighten the oil filter using the oil filter wrench. Again, be careful not to overtighten the filter.
8. Fill the engine with new oil.
9. Check the oil level and add more oil if necessary.
10. Start the engine and let it run for a few minutes to circulate the new oil. Check for any leaks and tighten the oil filter if necessary.
| Step | Description |
|---|---|
| 1 | Locate the oil filter housing. |
| 2 | Place the oil drain pan underneath the oil filter housing. |
| 3 | Use an oil filter wrench to loosen the oil filter. |
| 4 | Remove the old oil filter and discard it. |
| 5 | Rub a small amount of new oil on the gasket of the new oil filter. |
| 6 | Screw the new oil filter onto the housing by hand until it is snug. |
| 7 | Tighten the oil filter using the oil filter wrench. |
| 8 | Fill the engine with new oil. |
| 9 | Check the oil level and add more oil if necessary. |
| 10 | Start the engine and let it run for a few minutes to circulate the new oil. Check for any leaks and tighten the oil filter if necessary. |
How to Change Oil on Kia 2022 Selto
Changing the oil on your Kia 2022 Selto is a simple maintenance task that can be completed in about 30 minutes. By following these step-by-step instructions, you can save money and keep your car running smoothly.
Materials You’ll Need:
* 5 quarts of 0W-20 synthetic oil
* New oil filter
* Oil drain pan
* Funnel
* Wrench or socket set
* Rags
Instructions:
- Park your Selto on a level surface and engage the parking brake.
- Locate the oil pan underneath the engine.
- Place the oil drain pan under the oil pan.
- Unscrew the oil drain plug using a wrench or socket.
- Allow the oil to drain completely into the oil drain pan.
- Replace the oil drain plug and tighten it securely.
- Locate the oil filter on the engine.
- Use an oil filter wrench to remove the old oil filter.
- Apply a thin coat of new oil to the gasket of the new oil filter.
- Screw the new oil filter onto the engine by hand until it is snug.
- Using the oil filter wrench, tighten the oil filter an additional ¾ turn.
- Remove the funnel from the oil filler hole and insert the dipstick.
- Check the oil level and add more oil as needed.
- Replace the oil cap and tighten it securely.
- Start the engine and let it run for a few minutes.
- Check for any leaks and re-tighten any loose connections as necessary.
