The Over-Under Method
If you’re looking for a classic and stylish way to lace your Nike Blazers, the over-under method is a great choice. This method is simple and easy to do, and it creates a clean and polished look.
Here’s how to do it:
- Start by threading the laces through the bottom two eyelets on one side of the shoe.
- Cross the laces over each other and then thread them through the next two eyelets on the opposite side of the shoe.
- Continue crossing the laces over each other and threading them through the eyelets until you reach the top of the shoe.
- Tie the laces in a knot at the top of the shoe.
Here’s a table summarizing the steps:
Step Instructions 1 Thread the laces through the bottom two eyelets on one side of the shoe. 2 Cross the laces over each other and then thread them through the next two eyelets on the opposite side of the shoe 3 Continue crossing the laces over each other and threading them through the eyelets until you reach the top of the shoe. 4 Tie the laces in a knot at the top of the shoe. The Staircase Method
The Staircase Method is a classic lacing technique that gives your Nike Blazers a clean, polished look. It involves creating a series of “stairs” with the laces, starting from the bottom.
Step-by-Step Instructions
- Thread the laces through the bottom eyelets. Criss-cross the laces and pull them through the opposite bottom eyelets.
- Create the first "stair". Take the right lace and cross it over the left lace, creating a diagonal line. Thread the right lace through the next eyelet on the same side.
- Repeat on the other side. Take the left lace and cross it over the right lace, creating a stair on the opposite side. Thread the left lace through the next eyelet on the same side.
- Continue alternating. Repeat steps 2 and 3, creating a series of stairs up the shoe. When you reach the top, tie the laces securely.
Steps Actions 1 Thread laces through bottom eyelets and criss-cross. 2 Create a diagonal line with right lace, thread through next eyelet. 3 Create a diagonal line with left lace, thread through next eyelet. 4 Repeat steps 2 and 3 until reaching the top, then tie laces. The One-Shoe-at-a-Time Method
This is the most common and straightforward way to lace Nike Blazers. It’s also the method that’s recommended by Nike itself.
To lace your Nike Blazers using the one-shoe-at-a-time method, follow these steps:
- Unlace the bottom two eyelets on one shoe.
- Thread the lace through the bottom eyelet on the inside of the shoe.
- Cross the lace over the shoe and thread it through the bottom eyelet on the outside of the shoe. (See step 3 in the table below.)
- Pull the lace tight.
- Repeat steps 3-4 for the next two eyelets up.
- Now, thread the lace through the next eyelet on the inside of the shoe and cross it over to the outside of the shoe. (See step 6 in the table below.)
- Thread the lace through the next eyelet on the outside of the shoe and cross it over to the inside of the shoe. (See step 7 in the table below.)
- Repeat steps 6-7 for the remaining eyelets.
- Tie the laces together at the top of the shoe.
Step Description Image 1 Unlace the bottom two eyelets 
2 Thread the lace through the bottom eyelet on the inside of the shoe 
3 Cross the lace over the shoe and thread it through the bottom eyelet on the outside of the shoe 
4 Pull the lace tight 
5 Repeat steps 3-4 for the next two eyelets up 
6 Thread the lace through the next eyelet on the inside of the shoe and cross it over to the outside of the shoe 
7 Thread the lace through the next eyelet on the outside of the shoe and cross it over to the inside of the shoe 
8 Repeat steps 6-7 for the remaining eyelets 
9 Tie the laces together at the top of the shoe 
The Toe-in Method
The toe-in method is a classic way to lace Nike Blazers, resulting in a neat and secure fit. Here’s the step-by-step guide:
1. Cross the laces: Lace your shoe as you usually would, crossing the laces over each other.
2. Bring the laces to the top: Pull the laces through the top two eyelets and out of the shoe.
3. Crossover again: Bring the laces back down to the next two eyelets and cross them over once more.
4. Create a Z-shape pattern: Pull the left lace through the eyelet to the right, and the right lace through the eyelet to the left. Repeat this pattern until you reach the top of the shoe. Here’s a visual representation:
Left Lace Right Lace Eyelet 1 Eyelet 2 Eyelet 2 Eyelet 1 Eyelet 3 Eyelet 4 Eyelet 4 Eyelet 3 5. Lace up the remaining eyelets: Continue the Z-shape pattern until you reach the top of the shoe. Cross the laces one last time and tie a secure knot.
The Looping Method
Step 1: Prepare the laces
Start with laces that are approximately twice the length of your shoe.
Step 2: Lace through the first two eyelets
Start by threading the laces through the bottom two eyelets on one side of the shoe.
Step 3: Cross the laces
Cross the laces over each other and loop them through the next two eyelets on the opposite side of the shoe.
Step 4: Repeat steps 2-3
Continue following steps 2 and 3 until you reach the top of the shoe.
Step 5: Lace over and under
For the final step, lace the laces over the first eyelet and under the second eyelet on one side of the shoe. Then, lace the laces under the first eyelet and over the second eyelet on the opposite side of the shoe. This creates a snug and secure fit.
Step 6: Tie the laces
Tie the laces securely using your preferred method. Common options include the standard knot, the double knot, or the bow tie.
| Lacing Method | Steps |
|—|—|
| Looping Method | 6 |The Figure-Eight Method
The Figure-Eight Method is a popular lacing technique that creates a secure and comfortable fit. It’s particularly suitable for shoes with an even number of lace holes, such as Nike Blazers.
Steps:
-
Lace Cross: Thread the laces through the bottom two eyelets from the outside in.
-
Lace Back: Cross the laces over each other and insert them into the third and fourth eyelets from the inside out.
-
Lace Across: Thread the laces through the opposite eyelets on each side, from the outside in.
-
Lace Back: Cross the laces and thread them into the fifth and sixth eyelets from the inside out.
-
Lace Alternately: Continue threading the laces alternately through the remaining eyelets, crossing them before inserting into the opposite eyelets.
-
Tighten and Double-Cross:
a. Pull on the laces to tighten them evenly.
b. Double-cross the laces at the top two eyelets to create a secure knot.
The Straight-Line Method
The Straight-Line Method is a classic crisscross lacing technique that provides a secure and balanced fit. It’s ideal for casual wear or everyday activities.
1. Insert the Lace from the Bottom
Thread the lace through the bottom pair of eyelets, one on each side.
2. Crisscross the Lace
Bring the right lace up and through the next eyelet on the left side. Then, bring the left lace up and through the next eyelet on the right side.
3. Repeat Steps 2-3
Continue crisscrossing the lace, alternating sides, until you reach the top.
4. Pass the Lace Through the Top Eyelets
Insert each lace end through the top eyelet on the corresponding side.
5. Tie the Laces
Tie the laces together using a standard bow tie or another knot of your preference.
6. Adjust the Tension
Pull on the laces to tighten the fit or loosen them for a more relaxed feel.
7. Secure the Lace Ends (Detailed Explanation)
To prevent the lace ends from fraying or coming undone:
Step Description a) Hold the left lace end and cut off about 1 inch of excess lace. b) Heat the cut end of the lace with a lighter or match to seal it and prevent fraying. c) Repeat steps a) and b) for the right lace end. d) Loop the left lace end through the top eyelet on the right side. e) Loop the right lace end through the top eyelet on the left side. f) Tie the lace ends together securely. The Zigzag Method
The zigzag method is a popular lacing technique that creates a classic and timeless look. It’s particularly well-suited for Nike Blazers as it enhances the shoe’s iconic design. Here’s a step-by-step guide to lace your Blazers using the zigzag method:
Step 1: Start at the Bottom
Insert one end of the lace into the bottom eyelet of one shoe.
Step 2: Cross Over
Cross the lace over to the opposite side and insert it into the corresponding eyelet.
Step 3: Zigzag Up
Zigzag the lace up, crossing it over to the opposite side at each eyelet.
Step 4: Cross Back Down
When you reach the top, cross the lace back down to the opposite side.
Step 5: Repeat for Other Side
Repeat the zigzag process for the other shoe.
Step 6: Cross and Tighten
At the last eyelet, cross the laces over each other and pull them tight.
Step 7: Double Knot
Double knot the laces to secure them.
Step 8: Adjust and Play with Lace Length
Adjust the lace length to your desired comfort level. Experiment with different lace lengths to create different looks, such as a longer lace coming out of the top or a shorter lace tucked inside.
Lace Length Look Longer (10-12 inches) Loose and casual Medium (8-10 inches) Semi-casual, versatile Shorter (6-8 inches) Clean and tucked-in, ideal for formal occasions The Criss-Cross Method
This method creates a clean and understated look and is the most classic way to lace Nike Blazers. It’s also very easy to do.
- Start by threading the laces through the bottom two eyelets on the inside of the shoe.
- Bring the laces up and cross them over each other.
- Thread the laces through the next two eyelets on the outside of the shoe.
- Bring the laces back down and cross them over each other again.
- Continue this process until you reach the top of the shoe.
- Tie the laces together in a bow or knot.
Here’s a more detailed guide to the criss-cross method.
Step Instructions 1 Lace the laces through the bottom two eyelets on the inside of the shoe. 2 Cross the laces over each other. 3 Thread the laces through the next two eyelets on the outside of the shoe. 4 Cross the laces over each other again. 5 Continue this process until you reach the top of the shoe. 6 Tie the laces together in a bow or knot. The Hide-and-Seek Method
This method is a bit more complex but creates a cleaner, more intricate look. Start by hiding the bottom lace in the bottom eyelet and coming up through the eyelet on the opposite side. Cross it over the top into the other bottom eyelet and up through the top eyelet on the opposite side. Repeat this process until you reach the top of the shoe.
Once you reach the top, cross the left lace over the right lace and tuck it under the lace on the right. Take the right lace and cross it over the left lace, tucking it under the lace on the left. Repeat this process until you reach the bottom of the shoe, tightening as you go.
When you reach the bottom, tie the laces in a bow or knot. To give your shoe a unique touch, you can try different variations of this method, such as:
Variation Description Criss-Cross Cross the laces over each other as you lace up, creating a criss-cross pattern. Double Loop Instead of crossing the laces over each other, make a loop with one lace and then thread the other lace through the loop. Lace Locks Create a series of lace locks by looping one lace over the other and then locking it in place. How To Lace Nike Blazers
Nike Blazers are a classic sneaker that has been around for decades. They are a versatile shoe that can be worn for a variety of occasions, from casual to dressy. One of the things that makes Blazers so popular is their unique lacing system. Here is a step-by-step guide on how to lace Nike Blazers:
- Start by threading the laces through the bottom two lace holes on one side of the shoe.
- Bring the laces up and cross them over each other.
- Thread the laces through the next two lace holes on the opposite side of the shoe.
- Bring the laces back down and cross them over each other.
- Continue lacing the shoes in this manner until you reach the top.
- Start by threading the laces through the bottom two lace holes on one side of the shoe.
- Bring the laces up and cross them over each other.
- Thread the laces through the next two lace holes on the opposite side of the shoe.
- Bring the laces back down and cross them over each other.
- Thread the laces through the top two lace holes on one side of the shoe.
- Tie the laces in a bow.
- Start by threading the laces through the bottom two lace holes on one side of the shoe.
- Bring the laces up and cross them over each other.
- Thread the laces through the next two lace holes on the opposite side of the shoe.
- Bring the laces back down and cross them over each other.
- Continue lacing the shoes in this manner until you reach the second to last lace hole on each side.
- Tie the laces in a bow.
- Start by threading the laces through the bottom two lace holes on one side of the shoe.
- Bring the laces up and cross them over each other.
- Thread the laces through the next two lace holes on the opposite side of the shoe.
- Bring the laces back down and cross them over each other.
- Continue lacing the shoes in this manner until you reach the top lace holes.
- Cross the laces over each other and thread them through the top lace holes on the opposite side of the shoe.
- Bring the laces back down and thread them through the top lace holes on the same side of the shoe.
- Tie the laces in a bow.
Once you have finished lacing the shoes, you can tighten them by pulling on the laces. You can also adjust the lacing to create a different look. For example, you can lace the shoes more loosely for a more casual look, or you can lace them more tightly for a more formal look.
People Also Ask About How To Lace Nike Blazers
How do I lace Nike Blazers with 6 lace holes?
To lace Nike Blazers with 6 lace holes, follow these steps:
Can I lace Nike Blazers without using the top lace holes?
Yes, you can lace Nike Blazers without using the top lace holes. To do this, follow these steps:
How do I lace Nike Blazers to make them look like high tops?
To lace Nike Blazers to make them look like high tops, follow these steps:
