Are your trousers always crumpled and untidy when you take them out of the closet? Do you spend too much time ironing them before you can wear them? If so, then you need to learn how to hang trousers properly. Hanging trousers correctly will not only prevent them from wrinkling, but it will also help them to last longer. Here are a few simple steps on how to hang trousers without making them wrinkle:
First, you need to find the right hanger. The best type of hanger for trousers is a wide, wooden hanger with a bar that runs across the bottom. This type of hanger will help to distribute the weight of the trousers evenly and prevent them from sagging. Once you have found the right hanger, you need to hang the trousers by the waistband. Make sure that the waistband is evenly distributed over the hanger and that the trousers are hanging straight.
If you are hanging multiple pairs of trousers, you can use a pants rack to save space. Pants racks are available in a variety of sizes and styles, so you can find one that fits your needs. To hang trousers on a pants rack, simply fold the trousers in half and hang them over the bar. Make sure that the waistband is facing out and that the trousers are hanging straight. Hanging trousers properly is a simple task that can make a big difference in the appearance of your clothes. By following these simple steps, you can keep your trousers looking neat and wrinkle-free.
Measuring and Marking the Waistband
Accurately measuring and marking the waistband is crucial for ensuring a proper and secure fit for your trousers. Follow these detailed steps to ensure precision:
-
Determine the Center Front and Center Back
Identify the center front and center back of the waistband by aligning the raw edges of the side seams. Fold the waistband in half lengthwise and mark the center front and center back points with pins or chalk.
-
Measure the Waist and Mark the Hang Points
Measure the circumference of your waist at the desired wearing height. Divide this measurement in half and mark the center point on the waistband. Measure the distance from the center point to the desired hanging location on each side and mark these points with pins or chalk.
-
Draw the Hang Lines
Using a ruler or measuring tape, draw straight lines from the center point to each of the marked hanging points. These lines represent the hang lines for your trousers.
-
Determine the Length of the Hang Lines
Measure the desired length of the hang lines from the top of the waistband to the bottom of the trousers (where they will be hung). Add approximately 1-2 inches to this measurement to account for the space needed to thread the hanger through the waistband.
-
Mark the Hang Line Length
Measure the desired hang line length on each hang line, starting from the center point. Mark these points with pins or chalk. These marks indicate where you will sew the hang tabs.
| Measurement | Description |
|---|---|
| Waist circumference | The measurement around your waist at the desired wearing height |
| Half waist measurement | Half of the waist circumference |
| Distance to hanging location | The distance from the center point to the desired hanging location on each side |
| Hang line length | The distance from the top of the waistband to the bottom of the trousers, plus 1-2 inches |
Preparing the Hanger
1. Use a Sturdy Hanger
Opt for hangers made of durable materials such as wood, metal, or reinforced plastic. These hangers can withstand the weight of heavy trousers without bending or breaking.
2. Choose the Right Size and Shape
Select a hanger that is appropriate for the size and type of trousers. For dress pants, use hangers with wide, non-slip shoulders to prevent slipping or sagging. For jeans or casual trousers, a smaller hanger with a single bar is suitable.
a) For Dress Pants:
| Type | Description |
|---|---|
| Wide Shoulders | Provides support for the wider waistband of dress pants, preventing wrinkles. |
| Non-Slip Material | Keeps the pants securely in place, eliminating slipping and bagging. |
b) For Jeans or Casual Trousers:
| Type | Description |
|---|---|
| Single Bar | Accommodates the slimmer waistband of jeans or casual trousers. |
| Rounded Edges | Prevents creases or indentations from forming on the fabric. |
Using a Trouser Bar
Hanging trousers using a trouser bar is a simple and effective way to keep them organized and wrinkle-free. Here’s a step-by-step guide on how to do it:
1. Prepare the Trousers
Unbutton or unzip the trousers and lay them flat on a surface.
2. Find the Trouser Bar
Most wooden hangers have a bar located at the bottom of the hanger. If your hanger doesn’t have a bar, you can purchase a separate trouser bar that can be attached to the hanger.
3. Fold the Trousers in Half
Fold the trousers in half lengthwise, so that the front pockets are lined up.
4. Drape the Trousers over the Bar
Drape the folded trousers over the trouser bar, with the waistband facing the back of the hanger and the cuffs facing the front.
5. Fold the Excess Fabric
If there is excess fabric at the bottom of the trousers, fold it back up toward the waistband as follows:
- Take the excess fabric at one side of the trousers and fold it up.
- Repeat for the other side of the trousers.
- Tuck the folded fabric under the trouser bar.
By folding the excess fabric, you create a clean and uniform look, and prevent wrinkles from forming at the bottom of the trousers.
6. Hang the Trousers
Hang the trousers on a hanging rod in your closet, ensuring that they are evenly spaced and not crowded.
Suspending from the Side Loops
This method is suitable for trousers with belt loops located on the sides of the waistband. It provides a more organized and space-efficient way to hang multiple pairs of trousers.
Step 1: Arrange the Trousers
Fold the trousers in half lengthwise, ensuring the waistband overlaps.
Step 2: Select a High-Quality Hanger
Choose a hanger that is wide enough to accommodate the width of the trousers and has a non-slip surface to prevent them from sliding off.
Step 3: Install the Suspending Device
Attach the suspending device, which can be a hook or a loop, to the side loop of the trousers.
Step 4: Insert the Hanger
Insert the hanger into the suspending device, ensuring that it is securely held in place.
Step 5: Adjust the Position
Adjust the position of the trousers on the hanger so that they hang evenly and without any wrinkles.
Step 6: Space Optimizing Techniques
To maximize space utilization, consider the following techniques:
| Technique | Description |
|---|---|
| Cascading | Suspending multiple pairs of trousers from a single hanger, one below the other. |
| Double Hanging | Hanging two pairs of trousers on a single hanger, one on each side. |
| Overlapping | Overlapping the waistband of one pair of trousers with the hem of another pair, reducing the overall hanging space. |
Employing a Coat Hanger
Coat hangers provide a simple and effective method for hanging trousers. Follow these steps to use a coat hanger effectively:
- Unbutton or unzip the trousers and remove any items from the pockets.
- Fold the trousers in half lengthwise, aligning the creases.
- Hang the top of the trousers over the hanger, ensuring that the waistband is centered.
- Unfold the bottom half of the trousers and align the legs.
- Smooth out any wrinkles by gently pulling down on the fabric.
- For additional stability, secure the cuff of one leg over the hook of the hanger.
- Repeat steps 3-6 with the other trouser leg, ensuring they overlap slightly and creating a neat and tidy appearance.
Tips for Using a Coat Hanger
- Use a hanger with a wide shoulder area to prevent the trousers from sagging.
- Hang the trousers in a closet or on a rack where they will not be subjected to excessive heat or moisture.
- Rotate the trousers on the hanger periodically to ensure even distribution of weight.
Combining a Trouser Hanger and a Coat Hanger
This technique is ideal for maximizing closet space and creating a wrinkle-free storage solution for trousers.
9. Detailed Instructions:
- Fold the trousers in half lengthwise, aligning the waistbands and creases.
- Place the folded trousers over a coat hanger, with the waistband facing the hook.
- Insert the coat hanger’s hook into the loop at the back of the trouser waistband.
- Pull the bottom of the trousers taut, smoothing out any wrinkles.
- Hang the coat hanger in the closet, ensuring that the trousers hang vertically.
- To remove the trousers, simply remove the coat hanger’s hook from the waistband loop.
|
Advantages |
Disadvantages |
|---|---|
|
Maximizes closet space Keeps trousers wrinkle-free |
Requires a coat hanger for each pair of trousers Can be slightly more time-consuming than folding |
Specialized Trouser Hangers
When selecting specialized trouser hangers, consider the specific type of trousers you’re trying to hang. Here’s a more detailed breakdown:
1. Clamping Hangers
Clamping hangers have a sturdy metal construction with adjustable jaws that clamp onto the waistband of the trousers. This type of hanger is particularly suitable for delicate fabrics or trousers with wide waistbands.
2. Bar-Style Hangers
Bar-style hangers have a horizontal bar that runs across the top of the hanger. The trousers are hung over the bar, allowing them to hang naturally without creases or bunching. These hangers are ideal for casual trousers, such as jeans and khakis.
3. Skirt Hangers with Clips
Skirt hangers with clips have a skirt-shaped base and adjustable clips that hold the trousers in place. This type of hanger is often used for skirts, but it can also be used for trousers with pleats or other details that need to be preserved.
4. Valet Rod Hangers
Valet rod hangers have a sturdy metal frame with a horizontal rod that slides out, allowing you to hang multiple pairs of trousers at once. This type of hanger is great for saving space in the closet and keeping trousers organized.
5. Trouser Crease Shapers
Trouser crease shapers are specially designed hangers that create a sharp crease down the center of the trousers. These hangers are ideal for formal trousers or dress pants that require a crisp, tailored look.
