5 Easy Ways to Measure 2/3 Cup Without a Measuring Cup

Measuring 2/3 cup without a measuring cup

Measuring ingredients with precision is crucial for successful baking and cooking, especially when it comes to smaller quantities. If you find yourself without a measuring cup and in need of 2/3 cup, don’t fret! There are simple and effective ways to measure this amount accurately using common household items. In this article, we’ll explore several methods that will help you achieve the perfect 2/3 cup measurement without a measuring cup.

One convenient method is to use a kitchen scale. Digital kitchen scales are readily available and provide precise measurements in grams or ounces. Simply place an empty bowl on the scale and press the “tare” or “zero” button. Gradually add the ingredient you need to measure until the scale reads 53 grams or 1.86 ounces, which is equivalent to 2/3 cup. This method ensures accuracy and eliminates the need for any additional conversions.

Another method involves using a tablespoon. This is a versatile utensil that can be found in most kitchens. To measure 2/3 cup using tablespoons, fill the tablespoon to the brim and level it off using a knife or your finger. Repeat this process 13 times. This will give you approximately 2/3 cup of the desired ingredient. While not as precise as using a kitchen scale, this method is simple and can provide a reasonably accurate measurement in the absence of a measuring cup.

Estimate Using a Tablespoon

Measuring 2/3 cup without a measuring cup is possible with a little estimation and a spoon. A tablespoon holds approximately 1/2 fluid ounce or 15 milliliters, making it a convenient tool for measuring smaller amounts.

To measure 2/3 cup using a tablespoon, follow these steps:


1. Fill a tablespoon with the desired ingredient to the brim.
2. Level off the top of the tablespoon using a knife or straight edge.
3. Count the number of tablespoons until you reach 4.

The count of 4 level tablespoons will give you an approximate measure of 2/3 cup. Keep in mind that this method provides an approximation and may not be perfectly accurate, but it’s a useful technique when a measuring cup is not available.

Use a Graduated Container

If you don’t have a measuring cup but do have a graduated container, such as a glass or pitcher, you can easily measure 2/3 cup. Here’s how:

Look for the milliliter (mL) markings on the container. 2/3 cup is equivalent to approximately 150 mL.
Fill the container with water up to the 150 mL mark. You can use a spoon or a dropper to carefully add water.
Pour the water into the ingredient bowl or measuring vessel. You now have 2/3 cup of liquid measurement.

Here’s a table summarizing the conversion:

Measurement	Equivalent in mL
2/3 cup	150

Convert to Fluid Ounces

If you don’t have a measuring cup but you do have a measuring spoon, you can convert the 2/3 cup to fluid ounces. There are 8 fluid ounces in 1 cup, so 2/3 cup is equal to 8 ÷ 3 = 2.67 fluid ounces.

Using Measuring Spoons

To measure 2/3 cup using measuring spoons, you will need:

– 1/3 cup measuring spoon
– 1 tablespoon measuring spoon
– 1 teaspoon measuring spoon

Using these measuring spoons, you can measure 2/3 cup as follows:

Measurement	Number of Spoons
1/3 cup	2
1 tablespoon	1
1 teaspoon	1

First, measure 2 level spoonfuls of 1/3 cup measuring spoon, which equals 2/3 cup. Then, measure 1 level spoonful of 1 tablespoon measuring spoon, which equals 1/3 cup. Finally, measure 1 level spoonful of 1 teaspoon measuring spoon, which equals 1/3 cup. By combining these measurements, you have measured out a total of 2/3 cup.

Employ the Hand Measuring Technique

Employing the hand measuring technique is a convenient method to measure 2/3 cup of an ingredient without the need for a measuring cup. By following this technique, you can approximate 2/3 cup using your hand.

Step 1: Open Your Hand

Begin by opening your hand and spreading your fingers out. Your palm should be facing upwards.

Step 2: Form a Cup

Use your thumb and forefinger to form a cup-like shape. Your other fingers should be curled inward to support the cup.

Step 3: Fill the Cup

Fill the hand cup with the ingredient you wish to measure. Ensure that you level off the top of the cup using a knife or straight edge to obtain an accurate measurement. The amount of ingredient in the cup will be approximately 2/3 cup.

Step 4: Estimate the Amount

The amount of ingredient contained in your hand cup may vary slightly depending on the size of your hand. If you have large hands, you may need to fill the cup less than halfway to obtain the desired 2/3 cup measurement. Conversely, if you have smaller hands, you may need to fill the cup more than halfway.

Hand Size	Fill Level
Large	Less than halfway
Medium	Halfway
Small	More than halfway

By taking into account the size of your hand and adjusting the fill level accordingly, you can reliably measure 2/3 cup of an ingredient without the need for a measuring cup.

Estimate Using a Knife

If you don’t have a measuring cup, you can estimate 2/3 cup using a knife. Here’s how:

1. Gather Your Materials

You will need a knife, a spoon, and a bowl.

2. Create a Level Surface

Hold the knife horizontally over the bowl, with the blade facing down. Make sure the knife is level.

3. Scoop and Level

Use the spoon to scoop up the ingredient you want to measure. Hold the spoon level over the knife, and gently tap the bottom of the spoon to level off the ingredient.

4. Repeat the Process

Continue scooping and leveling the ingredient until you have reached the desired amount. For 2/3 cup, you will need to fill the spoon and level it 2 1/2 times.

5. Check Your Progress

As you scoop and level, check your progress by comparing the amount of ingredient you have to a standard 2/3 cup measuring cup. If you are using a dry ingredient, such as flour, you may need to pack it down into the spoon to get an accurate measurement.

Utensil	2/3 Cup Amount
Knife and spoon	2 1/2 scoops
Standard measuring cup	3.33 fluid ounces

Use a Digital Spoon Scale

A digital spoon scale is the most accurate method of measuring 2/3 cup without a measuring cup. These scales are very precise and can weigh ingredients to the nearest gram. To use a digital spoon scale, follow these steps:

Place a bowl or container on the scale and press the “tare” button. This will zero out the scale.
Add the ingredient to the bowl or container until the scale reads 133 grams. This is equivalent to 2/3 cup.

Tips for Using a Digital Spoon Scale

Here are some tips for using a digital spoon scale to measure ingredients:

Make sure the scale is calibrated before using it. To calibrate the scale, place a known weight on the scale and press the “calibrate” button. The scale will then adjust its readings accordingly.
Use a clean spoon or scoop to add the ingredient to the bowl or container. This will prevent the scale from becoming contaminated.
Be patient when using a digital spoon scale. It may take a few seconds for the scale to register the weight of the ingredient.

Comparing Different Methods of Measuring 2/3 Cup

The table below compares the accuracy and convenience of different methods of measuring 2/3 cup.

Method	Accuracy	Convenience
Digital spoon scale	Very accurate	Requires a digital spoon scale
Tablespoon	Less accurate	Does not require special equipment
Eyeballing	Least accurate	Does not require special equipment

Measure with a Straw

1. Fold a piece of paper in half

2. Fold it in half again lengthwise

3. Fold it in half once more

4. Unfold the paper and you should see three equal sections

5. Fill a cup with water to the brim, then use a straw to transfer the water to one of the sections of the paper

6. Once the section is full, pour the water back into the cup

7. Fill the paper section with water again, then mark the level of the water on the outside of the cup with your finger or a pen. This will give you the measurement for 1/3 cup. Fill the paper section two more times and mark the levels to get 2/3 cup.

8. Pour the water out of the cup

9. Fill the cup with your desired ingredient to the 2/3 cup mark you made on the outside of the cup.

Utilize a Teacup

While teacups vary in size, most standard teacups hold approximately 6 fluid ounces. To measure 2/3 cup using a teacup, follow these steps:

1. Fill the Teacup to the Rim

Fill a standard teacup to the very top with the desired liquid.

2. Pour Out 1/3 of the Teacup

Carefully pour out or scoop out one-third of the liquid from the teacup. This will leave you with 4 fluid ounces, which is equivalent to 2/3 cup.

3. Use a Spoon or Measuring Tablespoon

Alternatively, you can use a spoon or measuring tablespoon to remove 1/3 of the teacup’s contents. Fill the spoon or tablespoon with the liquid and pour it out until you have removed 2 fluid ounces.

4. Utilize a Tablespoon and Teaspoon

If you don’t have a measuring tablespoon, you can use a regular tablespoon and a teaspoon. One tablespoon equals 3 teaspoons, so remove 6 teaspoons (2 tablespoons) of liquid from the teacup to measure 2/3 cup.

5. Determine the Teacup’s Volume

If you’re unsure about the volume of your teacup, you can use a measuring cup to determine it. Fill the teacup to the brim and pour the liquid into the measuring cup. Note the measurement in fluid ounces or milliliters.

6. Convert to Milliliters

If your teacup’s volume is measured in milliliters (mL), you can convert it to fluid ounces (fl oz) using the following formula: 1 mL = 0.0338 fl oz.

7. Use a Volumetric Ratio

Another method is to use a volumetric ratio. If a standard teacup holds 6 fl oz, then 2/3 of that volume would be 4 fl oz. Therefore, using a ratio of 2:3, you can determine the amount of liquid you need to remove from the teacup to obtain 2/3 cup.

Measuring Table

Measurement	Number of Stra
1/3 cup	1
2/3 cup	2

Quantity	Method	Actions
2/3 cup	Using a teacup	Fill the teacup to the rim and pour out 1/3 of the liquid.
2 tablespoons	Using a measuring tablespoon	Remove 2 tablespoons of liquid from the teacup.
6 teaspoons	Using a tablespoon and teaspoon	Remove 2 tablespoons (6 teaspoons) of liquid from the teacup.

Rely on Common Household Utensils

If you don’t have a measuring cup handy, there are several common household utensils that you can use to measure 2/3 cup instead:

Tablespoons

Count out 10 level tablespoons to equal 2/3 cup.

Teaspoons

Count out 20 level teaspoons to equal 2/3 cup.

Measuring Spoons

Here is a table showing the measurements of different spoon sizes:

Spoon Size	Measurement
Tablespoon	3 teaspoons
Teaspoon	1/3 tablespoon
1/2 Teaspoon	1/6 tablespoon
1/4 Teaspoon	1/12 tablespoon

Soup or Ice Cream Scoop

Use a 1/3-cup scoop or a small ice cream scoop that holds about 2 tablespoons to scoop out 3 scoops to equal 2/3 cup.

Egg Cups

Fill a standard egg cup to the brim 4 times to equal 2/3 cup.

Dixie Cups

Fill a standard 6-ounce Dixie cup to the brim 2 times to equal 2/3 cup.

Muffin Tins

Fill a standard muffin tin cup to the brim 3 times to equal 2/3 cup.

Coffee Mugs

Fill a standard coffee mug to the 5-ounce mark to equal 2/3 cup.

Cups

Fill a standard measuring cup to the 2/3-cup mark to equal 2/3 cup.

Calibrate a Measuring Cup

To calibrate a measuring cup without using a standard measuring cup, you can use the following steps:

Fill a clear glass or jar with water. Mark the 2/3 cup level on the glass.
Pour the water into a measuring spoon. The number of spoonfuls it takes to reach the 2/3 cup mark on the spoon is equivalent to 2/3 cup.
For example, if it takes 10 spoonfuls to reach the 2/3 cup mark on the spoon, then 1 spoonful is equivalent to 1/30 cup.
Multiply the number of spoonfuls by 1/30 to find the equivalent volume in cups.
For example, if it takes 10 spoonfuls to reach the 2/3 cup mark on the spoon, then 10 spoonfuls x 1/30 cup/spoonful = 1/3 cup.
Now you have calibrated your measuring spoon to measure 1/3 cup.
To measure 2/3 cup, simply use 2 spoonfuls.
Repeat the process with different-sized spoons or cups to calibrate them for other measurements.
Note that spoon and cup sizes can vary, so it’s important to calibrate each one individually.
Use a ruler or measuring tape to mark the 2/3 cup level on the measuring spoon or cup for future reference.

Here is a table summarizing the steps:

Step	Description
1	Mark the 2/3 cup level on a clear glass or jar.
2	Pour the water into a measuring spoon and count the number of spoonfuls it takes to reach the 2/3 cup mark.
3	Multiply the number of spoonfuls by 1/30 to find the equivalent volume in cups.
4	Use the calibrated measuring spoon to measure 2/3 cup by using 2 spoonfuls.

How To Measure 2/3 Cup Without Measuring Cup

If you need to measure 2/3 cup of an ingredient but don’t have a measuring cup handy, there are a few simple methods you can use to get the job done accurately. Here are a few ways to measure 2/3 cup without a measuring cup:

Use a spoon: A tablespoon is equal to 1/16 cup, so 6 tablespoons is equal to 2/3 cup.
Use a mug: A standard coffee mug typically holds about 8 ounces, which is equal to 1 cup. So, 2/3 cup would be 5.33 ounces. You can fill the mug with water and pour out 5.33 ounces to get 2/3 cup.
Use a kitchen scale: If you have a kitchen scale, you can weigh the ingredient directly. 2/3 cup of flour weighs 48 grams, 2/3 cup of sugar weighs 133 grams, and 2/3 cup of water weighs 160 grams.